iVamp Trade for installers · One App - Any Brand
iVamp - The Installers Choice.
Fewer wasted call-outs and better handovers. iVamp Trade is the installer side of iVamp, built by a working electrician for sparks and for solar, battery and EV installers who want to look after their customers without living in the van.
Every customer site and device in one list, with live health: what's online, what's dropped off, and when it was last seen.
Rules you set per site - a reading too high or too low, or a device going offline - sent by email and notification.
The customer enters your invite code in their own iVamp app. They can stop sharing at any time, so nobody's watched without knowing.
One tap in the customer's app sends you a screenshot, a summary of every device and the last hour of readings.
Record volts, amps, watts and more on any channel for a set time, with a live chart, saved under its own reference.
PDF and CSV reports with your logo, colours and the customer's details - no iVamp branding on them.
When a customer shares their system with you, you can ask their iVamp app for more detail without a visit. It's picked up while iVamp is running on their phone, tablet or PC - usually within a minute.
Readings every 10 seconds for 5, 15 or 30 minutes, updating on your screen as they arrive. See the battery charge, the inverter wake up or the EV start, while you're on the phone to the customer.
Every 10, 30 or 60 seconds for up to 24 hours - enough to catch an evening peak or an overnight fault. Export it as a CSV.
Their app re-reads the shared devices, reconnecting any that have dropped off, and sends you models, firmware, network details and readings in one go.
Clamp a Shelly meter on the tails and leave a logging session running for a week. You get the property's real peak demand, with times, to back up your maximum-demand assessment and your conversation with the customer about load management. It supports your assessment and the DNO process; it doesn't replace them.
After the install, the same meter lets your customer see what charging costs - there's ready-made wording for that in the EV charger monitoring kit.
Log the current on the suspect circuit and line the trips up against what was running at the time. A power meter won't see earth leakage, but knowing that the RCD went every time the immersion and the washing machine overlapped narrows things down fast.
Record a session at handover and leave a branded report in the handover pack, next to your certificates, showing the system performing on day one. It's also a baseline if performance is questioned later.
"It's stopped working" often turns out to be a new router, a changed Wi-Fi password or a tripped breaker. Check the live state before you set off - or run a remote check and watch it live - and turn up with the right parts when it really is a fault.
On your laptop, tablet or phone, and subscribe to iVamp Trade inside the app.
Create a site per customer and set the alert rules you care about.
They install the free iVamp app, add their kit and enter your invite code to share it with you.
We're offering a free 3-month trial of iVamp Trade to installers who'll tell us honestly what would save them the most time. Get in touch and we'll set you up.
£24.99 a month, or £249.99 a year
Per installer, as a subscription in the iVamp app. The annual plan works out at £20.83 a month, about two months free. Your customers use the free iVamp app; there's no charge to them for sharing with you.
Got a bigger team or lots of sites? Talk to us.
For Windows, Mac and iPhone/iPad. Android is coming soon.
